An optical fiber and cable extrusion machine GXGLY45 type Uses: Fiber optic cable extrusion machines GXGLY45 type mainly produces optical fiber and cable, using the inner polyethylene jacket, PVC PVC, the wires were insulated wire core wire or cable sheath of the unit. Fiber optic cable is not aligning unit is equipped with mold, the production of wire is not eccentric, and consistent with the outer diameter of the wire. Equipment used to control the motor frequency composition, temperature, electrical control cabinet. Second, the optical fiber and cable extrusion machine GXGLY45 Technical parameters: 1, the fiber size: 2 × 5 mm 2, production speed: 0 ~ 100m / min 3, screw diameter: 45 mm 4, Host power: 5.5kw (Frequency) 5 heating power: 7kw 6, traction power: 2.2kw (Frequency) 7. Take-disc diameter: 400 ~ 630mm 8, Plastic Feeder: 900w (300kg / h) 9, plastic dryer: 4.75kw (capacity 25kg) Third, the fiber optic cable extrusion machine GXGLY45 type configurations: (1) three-disc release line machine (core diameter of 236 × 160 × width of the inner diameter of 108 × hole diameter 25.4mm) (2) a pair of horizontal frame line (3) extruder SJ45 type A (5.5kw inverter, four temperature, the plastic material, dryers) (4) four frequency synchronous temperature control cabinet (5) cold sink two sets of two-meter section (6) a pair of horizontal frame (7) of a blow dryer CG30 type (8) YZ-type printing machine, one Taiwan (9) double pull double income one machine SS400 / 630 type A (2.2kw inverter) (10 ) fiber-optic cable with two mold according to user needs to pay four, shall bear the freight for the parties to the human test machine production guidance 3000.00 yuan fee for the parties to the path of the accommodation costs shall be borne by the purchaser. Five other wooden packaging equipment is required to use another billing.